A repair from start to finish
This guide follows a repair through LintelCRM, from the moment it is reported to the cost landing on the landlord’s statement, and how inspections and certificate renewals feed into it. Maintenance needs the Professional plan or above.
Stage 1: the repair is reported
Section titled “Stage 1: the repair is reported”A repair becomes a maintenance job in one of three ways: you report it under Operations > Maintenance Jobs with Report Issue, a tenant reports it in the tenant portal (with a type, urgency, access details and up to five photos), or LintelCRM raises a renewal job for an expiring gas safety certificate or EICR when auto-instruct is switched on and an active preferred contractor exists for that work. A tenant-reported job shows a Tenant portal badge and reaches you straight away. See Report and manage maintenance jobs and Tenant portal.
Stage 2: triage
Section titled “Stage 2: triage”When a tenant marks a job High or Emergency, it shows Awaiting triage until you confirm or change the priority, so urgent claims get a human look. Reply to the tenant in the job’s conversation panel; they see your messages in their portal. Tenants are told in the portal to call the gas emergency line or 999 first for a gas leak or danger. See Report and manage maintenance jobs.
Stage 3: quotes and landlord approval
Section titled “Stage 3: quotes and landlord approval”When work needs a quote, add it to the job under Contractor quotes, submit it for decision, then approve or decline it, or use Ask landlord to send it to the landlord, who decides under Approvals in their landlord portal (an unanswered request can expire). An approved quote, by you or by the landlord, holds that amount back from what you can pay the landlord until the cost is charged against it. See Report and manage maintenance jobs, Landlord portal and Pay a landlord.
Stage 4: emergency authority
Section titled “Stage 4: emergency authority”For an Emergency job with no approved quote, assigning a contractor is allowed only if the landlord’s management agreement gives emergency authority: always, or up to a spend limit that covers the job’s estimated cost. The job then shows Emergency pre-authorised and the landlord is told. Otherwise LintelCRM refuses until a quote is approved. See Management agreements and commission and Report and manage maintenance jobs.
Stage 5: the contractor and the visit
Section titled “Stage 5: the contractor and the visit”Once a job is ready, assign a contractor from Operations > Contractors and schedule the visit. The tenant sees the visit under Visits in their portal and can add it to their calendar. A waiting job shows Overdue if its scheduled date passes before work starts. See Report and manage maintenance jobs.
Stage 6: work starts, pauses and resumes
Section titled “Stage 6: work starts, pauses and resumes”While a contractor works on a maintenance job, you track it with Start work, Put on hold and Resume on the job. Start work makes it In progress and, for a job the tenant reported, tells the tenant work has started. Put on hold pauses it with an optional reason that only your team sees (the tenant is told it is on hold, without the reason); you can still complete or cancel it. Resume returns it to In progress, or to waiting if work never started. The contractor cannot be changed while work is in progress: put the job on hold first. See Report and manage maintenance jobs.
Stage 7: completion and the cost
Section titled “Stage 7: completion and the cost”When the work is done, open the job, select Complete job, and enter the completion date and the Actual cost. If the job had an approved quote, a cost is required (only an owner or admin can complete it at no cost). If the property has a landlord, a cost above £0 is posted to their ledger as a Maintenance Cost, dated the completion date, and the hold from an approved quote goes down by the amount charged. If the cost is lower than the quote, the difference stays held until an owner or admin releases it or the job is cancelled. A job with a scheduled visit can be completed only from the visit date. If the cost was wrong or left blank, an owner or admin uses Correct cost on the job: the difference is posted to the landlord’s ledger, dated that day, with the old and new cost and the reason kept on the job. See How maintenance costs reach a landlord’s statement.
Stage 8: the landlord sees the cost
Section titled “Stage 8: the landlord sees the cost”After a maintenance job is completed with a cost, the cost appears in the Costs line of the landlord’s statement for the completion month (an already issued statement is voided and reissued), and in box 25 of their tax summary. The landlord sees the job’s status and contractor under Maintenance in their portal. If you pay out money held back for a repair before it is charged, only an owner or admin can. See How maintenance costs reach a landlord’s statement, Pay a landlord and A landlord’s money from start to finish.
Stage 9: inspections
Section titled “Stage 9: inspections”Separately from repairs, schedule inspections of a property under Operations > Inspections (move in, move out, routine, safety, seasonal or ad hoc). On completion you record a checklist of what you checked, a summary and recommendations, and can flag critical issues. On completion the inspector (or else the property’s agent, or else the owner) is notified, with high priority when critical issues were flagged. Anything that needs fixing is not raised automatically: report it as a new maintenance job. If you move an inspection to a day when another tenancy lives in the unit, it moves to that household, and the household it left is told it no longer concerns them. See Schedule and complete inspections.
Stage 10: certificates and renewals
Section titled “Stage 10: certificates and renewals”Safety certificates sit alongside repairs: record the gas safety certificate, EICR and EPC on the property, and LintelCRM marks them as due for renewal before expiry. With Auto-instruct engineers for compliance renewals switched on, an expiring gas safety certificate (42 days before) or EICR (30 days before) raises a renewal job and instructs your preferred contractor overnight; with no active preferred contractor for that work, no job is raised. On a single home the renewal job is linked to the tenancy living there on the visit day, so those tenants get the access notice and see a “Compliance visit” in their portal; on a property with several units it stays property-wide, so tell the households yourself. Renewed certificates replace the old dates on the same record, and the current ones show in the tenant and landlord portals. See Compliance certificates and Report and manage maintenance jobs.
Stage 11: what is kept afterwards
Section titled “Stage 11: what is kept afterwards”After a maintenance job is completed or cancelled, the job, its cost and its place on the landlord’s ledger stay as the repair and money record. By default, repair photos and contractor quote documents are deleted 72 months (6 years) after the job closed, and longer while that tenancy’s deposit is still open. A tenant’s comments on a repair read “[deleted]” once the tenant is erased or anonymised; your team’s and the contractor’s comments stay. A contractor’s name, email, phone and address are anonymised 72 months after their last job, quote or invoice, never while a job is open with them; their business name, jobs and costs stay, so landlord statements do not change. See Report and manage maintenance jobs.