Create a tenancy
A tenancy links one or more tenants to a unit at an agreed rent. When you create it, LintelCRM builds the rent schedule and marks the unit as let. Since 1 May 2026 an assured tenancy in England is periodic: you enter a start date but no end date, and the tenancy runs until it is ended with End tenancy.
Before you start
Section titled “Before you start”- You need permission to create tenancies. Owners, Admins, Full Agents and Lettings Agents have it. Sales Agents, Finance and Read Only users do not.
- The property and its unit must already exist. See Add a property.
- Two tenancies on a unit can never share a day, because the rent would be charged twice. If a tenancy is still running on the unit, record End tenancy on it first (see End a tenancy); the new tenancy must start after its last day. See Re-let a unit: the rules.
- Have the tenants ready. You can pick existing tenants or add a new one on the spot.
- To record a tenant who already lives in one of your properties (for example when you take over management), go to Lettings > Tenants and select Add Tenant: that form creates the tenant and their tenancy together.
- If the landlord has no management agreement, rent is still collected but no commission is taken. See Management agreements and commission.
- For what the Renters’ Rights Act changes across LintelCRM, see The Renters’ Rights Act in LintelCRM.
Create a tenancy from a property
Section titled “Create a tenancy from a property”- Go to Properties and open the property.
- On the Overview tab, select the vacant unit. A vacant unit shows “This unit is vacant & available” and a Create tenancy button.
- Click Create tenancy.
- If the property has approved applicants, From Approved Applicant appears at the top. Choosing one links the tenancy to that applicant and, if you pick nobody under Select Tenants, adds the applicant as the tenant for you, with their name, email and phone. If a tenant with that email already exists, that tenant is used.
- Under Select Tenants, pick one or more existing tenants. To add someone new, click Quick Add, fill in Full Name (required), Email, Phone and Company, then click Add to List.
- Under Lease Period, enter the Start date. There is no end date: the form shows “Periodic: since 1 May 2026 an assured tenancy has no end date (Renters’ Rights Act 2025 s.1, Housing Act 1988 s.4A). It ends only by notice.” Only if the let is not an assured tenancy, see A let that is not an assured tenancy.
- Under Rent Details, enter the Amount. The unit’s asking rent is filled in for you, and the Currency is GBP (£), the only one offered.
- Under Payment Schedule, choose the Frequency (Monthly or Weekly) and the due day: Due day of month (1 to 31) for monthly rent, Due day of week (Monday to Sunday) for weekly rent.
- Click Create tenancy.
A let that is not an assured tenancy
Section titled “A let that is not an assured tenancy”A few lets are not assured tenancies, and only those can still have a fixed term. To record one, tick This let is not an assured tenancy (it may have a fixed term) under Lease Period, choose Why it is not an assured tenancy, then enter the End date:
- Let to a company
- Rent over £100,000 a year
- Resident landlord
- Holiday let
Untick the box to go back to a periodic tenancy; the end date is dropped. If you send an end date for an assured tenancy, it is refused: “An assured tenancy has no end date: since 1 May 2026 it is periodic (Renters’ Rights Act 2025 s.1, Housing Act 1988 s.4A). Leave the end date empty, or record why this let is not an assured tenancy.”
Whether a let really falls outside the assured tenancy rules is a legal question, and the list above is under review with a solicitor. If you are not sure, treat the let as assured and take advice. This is not legal advice.
Rules the form applies
Section titled “Rules the form applies”- At least one tenant is required: pick or add one, or choose an approved applicant, who then becomes the tenant. Otherwise you see “Please select at least one tenant, create a new one, or select an approved applicant.”
- The dates are checked against every other tenancy on the unit, whether you create the tenancy here or from an application. It must start after the previous tenancy on the unit ended, and, if you are recording an old tenancy, end before the next one on the unit starts.
- The rent must be more than zero, with no more than two decimal places.
- Rent is held in pounds sterling (GBP); no other currency is offered or accepted.
- Rent is due weekly or monthly. An assured tenancy starting on or after 1 May 2026 cannot have quarterly or yearly rent; a let recorded as not assured can. See Rent schedule and due dates.
- The rent cannot be higher than the rent the unit was last advertised at, unless you re-advertised at the new rent. See Rental bidding: the rent cannot be above the advert.
- The start date can be in the past, so you can enter a tenancy that began earlier. The start year must be between 1990 and 2100.
- A fixed term (only for a let that is not assured) must end after it starts and can be at most ten years long.
- A due day of 29, 30 or 31 means the last day of a shorter month. The form shows “In a shorter month, rent is due on its last day.”
What happens next
Section titled “What happens next”- LintelCRM creates a charge for each rent period. A periodic tenancy gets a year of charges, topped up automatically, until End tenancy is recorded. A fixed term (a let that is not assured) gets a charge for every period up to its end date. See Rent schedule and due dates.
- The first full rent period starts on the first due date on or after the start date. If the tenancy starts between due days, the days before that are charged by the day as one first part period, due on the start date. For example, a tenancy starting on 15 January at £900 a month, due on the 1st, is charged £503.01 for 15 to 31 January, then £900.00 from 1 February.
- The unit’s status changes to let. The tenancy panel reads “Periodic since [start date]”.
- If you backdated the start, charges for past due dates are created straight away and show as overdue until you record the payments. See Record a rent payment.
- Taking a deposit is a separate step. See Take and protect a deposit.
- The tenant does not get portal access automatically. You invite them from their tenant page. See Tenant portal.
Create a tenancy from a tenancy application
Section titled “Create a tenancy from a tenancy application”If the tenant came through a tenancy application, create the tenancy from the application under Lettings > Applications. Under the Renters’ Rights Act no rent may be asked for or taken before both sides have signed the tenancy agreement, so the application follows this order:
- Approved. Give the tenant the written tenancy information before they sign (the pre-tenancy task plan has a step for it, “Give the written tenancy information”).
- Tenancy Agreement Signed. An approved application offers only this action. Enter Signed by both sides on (today by default, never in the future) and, optionally, a Signed copy (PDF, image or Word document, up to 10 MB, kept with the lead applicant’s documents), then click Record signed agreement. The application moves to Agreement signed and shows “Tenancy agreement signed on [date] (signed copy: [file])”; click the file name to download it.
- Deposit and first month’s rent. Only now can you request the security deposit and the first month’s rent. On a unit that takes a traditional deposit, the deposit still comes before the rent. The tenant’s email reads “Thank you for signing your tenancy agreement…” and says they will not be asked for more than one month’s rent before the tenancy starts.
- Create the tenancy. When the move-in money is ready, the application offers Create Tenancy (rent already recorded) or Confirm Payment & Create Tenancy; the window that opens ends with Create tenancy & confirm payment. It asks no end date unless you tick that the let is not an assured tenancy.
What LintelCRM refuses on the way:
- A deposit or rent request, or rent recorded as paid, before the agreement is signed: “Record the signed tenancy agreement first: under the Renters’ Rights Act no rent can be asked for or taken before both sides have signed it.”
- Rent recorded as paid with a date before the signing date.
- A rent request for more than one rent period: “At most one rent period can be taken before the tenancy starts (£[x]); £[y] was asked for.”
On a re-let, the lease start offered is the day after the unit’s current tenancy ends, and the same date rules apply as for a tenancy created from the property.
Rental bidding: the rent cannot be above the advert
Section titled “Rental bidding: the rent cannot be above the advert”Under the Renters’ Rights Act a landlord may not accept more than the rent a property was advertised at. LintelCRM keeps a record of every advertised rent: each time a To Let unit goes on the market with a rent, or its advertised rent changes, the rent and the date are kept, and the record closes when the unit leaves the market.
When you create a tenancy (from the property, Add Tenant or Confirm Payment & Create Tenancy), the agreed rent is compared with the unit’s latest advert over a year (a weekly rent counts 52 times). If it is higher, the tenancy is not created: “The rent (£[x] [frequency]) is above the rent this property was advertised at (£[y] a month, from [date]). Under the Renters’ Rights Act 2025 a landlord cannot accept more than the advertised rent. Use the advertised rent, or re-advertise at the new rent and give the date it was re-advertised.”
- Use the advertised rent, or, if the property was re-advertised at the higher rent, fill in Re-advertised at the new rent on (never a future date) and create the tenancy again.
- The tenancy panel then shows “Advertised at £[y] a month from [date].” and, when the rent was above it, “Agreed at £[x], above the advert: re-advertised at the new rent on [date].”
- Not checked: imported tenancies, tenancies starting before 1 May 2026, units never advertised to let in LintelCRM, and a let recorded as not an assured tenancy.
- A rent raised later is a rent increase, which follows section 13. See Change the rent or a tenancy’s details.
Whether re-advertising at a higher rent is enough to accept an offer at that rent is a question the audit has put to a solicitor. This is not legal advice.
Re-let a unit: the rules
Section titled “Re-let a unit: the rules”When a tenant is leaving and the next tenant is lined up, LintelCRM applies one rule to every way of creating the next tenancy: no two tenancies on a unit share a day.
- End tenancy must be recorded first. A periodic tenancy has no end date, so it carries on, with the unit let and rent charged, until you record End tenancy with the tenant’s last day. Nothing can start before then. See End a tenancy.
- No overlapping dates. The next tenancy can start from the day after the current tenancy’s last day, not on it. If the current tenancy ends on 26 February, the next can start on 27 February.
- The next tenancy can be on record before the current tenant leaves. Once End tenancy is recorded, LintelCRM accepts a next tenancy that starts after that last day while the current one is still running. The unit stays Let to the current tenant, and the current tenant’s Tenancy panel shows “Next tenancy signed from 27 Feb 2027”. The current tenancy closes overnight after its last day, and the next tenancy’s rent is charged from its own start date.
- The dates then hold each other. You cannot record End tenancy again on a later date that overlaps the next tenancy: “Another tenancy on this unit starts on 27 Feb 2027. End this tenancy before that date.”
- While a next tenancy is signed, the unit takes no further applications, repair and inspection notices still go to the tenant living there, and a sale hand-over of the unit is refused. See Sell a property that has a tenant.
- A unit recovered on Ground 1 or 1A cannot take a new assured tenancy until the re-let lock ends, 12 months after the end date: “This unit was recovered on Ground 1A: it cannot be re-let on an assured tenancy until [date] (12 months after the tenancy ended). An admin can override the lock, with a reason.” See End a tenancy.
Once End tenancy is recorded on the current tenancy, you can create the next one from any of three places. Each one starts the next tenancy on the day after the current tenancy’s last day, and refuses an earlier start.
- The application: Create tenancy is enabled, and the Re-letting note says “End tenancy is recorded for [date] … starting from [date] or later”.
- The property: the let unit’s Tenancy panel shows “Ends [date]. The next tenancy can start from [date].” and a Create next tenancy link.
- Add Tenant: the unit is offered as Ending, “Next tenancy from [date]”.
Until End tenancy is recorded, each place says so, and Create next tenancy stays greyed out with the reason. Once the next tenancy is signed, the panel reads “Next tenancy signed from [date]” and the unit is no longer offered. An application can select a let unit from 90 days before the current tenancy ends: “The unit is let until 31 Jul 2027. An applicant can be selected from 2 May 2027, 90 days before the current tenancy ends.”
If two people create a tenancy on the same unit at once
Section titled “If two people create a tenancy on the same unit at once”If two members of your team create a tenancy on the same unit at the same moment (or one person double-submits, or one uses an application while another creates it from the property), LintelCRM creates exactly one tenancy. The first request wins. The second is refused before anything is saved, with a message that the unit already has a tenancy on those dates. When the first was a re-let, it reads “The next tenancy on this unit is already signed, starting 28 Dec 2026.”
Nothing is half-created for the second person: no tenancy, no rent charges, no deposit and no tenant record. Refresh the property to see the tenancy your colleague created.
Delete a tenancy entered by mistake
Section titled “Delete a tenancy entered by mistake”On the tenancy panel, open the menu and choose Delete tenancy. This is only for a tenancy created in error. A tenancy with payments, tenant credit, arrears write-offs, landlord ledger entries or deposit money cannot be deleted; the menu item is greyed out with the reason, for example “This tenancy has payments recorded against it, so it cannot be deleted.” End the tenancy instead so its money stays on record.
Common problems
Section titled “Common problems”- Create tenancy is greyed out or missing. You may not have permission, or the unit already has an active tenancy. On a let unit, record End tenancy on the current tenancy first.
- There is no End date field. An assured tenancy is periodic and has no end date. Only a let that is not an assured tenancy has one: tick the box under Lease Period and choose why.
- “An assured tenancy has no end date…” You sent an end date without recording why the let is not assured. Leave the end date empty.
- “Rent cannot be due quarterly on a tenancy starting on or after 1 May 2026…” Choose weekly or monthly rent, unless the let is not an assured tenancy.
- “The rent (…) is above the rent this property was advertised at…” Use the advertised rent, or give the date the property was re-advertised at the new rent.
- “Record the signed tenancy agreement first…” On an application, record Tenancy Agreement Signed before the deposit and rent.
- “The previous tenancy on this unit ran until [date]. Start the new tenancy after that date.” The start date is on or before the last day of an earlier tenancy on the unit. Choose a later start.
- “The current tenancy on this unit runs until [date]. The next tenancy can start from [date].” The current tenancy has been ended on that date. Start the new one the day after.
- “…has not been ended, so it would roll on.” The current tenancy is still active because nobody has ended it. Record End tenancy on the current tenancy first, with the tenant’s last day.
- “The next tenancy on this unit is already signed, starting [date].” A re-let is already on record for the unit.
- “This unit was recovered on Ground 1A…” The unit is under a re-let lock. See End a tenancy.
- “No tenants or approved applicants found for this business.” Add a tenant first, or use Quick Add in the form.
- The due day is rejected for weekly rent. For weekly rent the due day is a weekday (Monday to Sunday), not a date. Change the Frequency first, then pick the day.